Methods of making up nets and cages


Release time:

2019-04-18

Fishing net mending refers to the repair of nets using the same gauge of fishing line. Fishing net manufacturers and fishermen, the most common contact technology is “mending”. For fishing net manufacturers, in China, no matter knotted or knotted nets, in the process of weaving nets (within the requirements of the national standard), or in the process of shaping, storage, handling, will always result in the phenomenon of broken nets. For fishery practitioners, mending net technology is a must, because fishing gear in fishing operations, often occur in the phenomenon of rupture. Its frequency and the number of fishing is directly proportional to the number of times, regardless of the use of trawling, seining or fixed mode of operation, the phenomenon of breakage is inevitable. It is during the storage of fishing nets, due to improper storage or by the animal withdrawal pecking, similar situations will also occur. Therefore, in order to ensure the normal operation of fishery fishing, it is very important to repair the nets.

In order to fully utilize the nets, the broken and bad nets should be repaired, therefore, mending nets has become one of the important basic techniques that fishing workers and fishing net factories need to master. Fishing net repair work is generally divided into three steps: 1. First of all, observe the mesh broken situation, the net broken situation is diverse, the degree of different sizes, roughly there are three types: holes, cracks and rupture of the oblique edge. According to the situation, properly organized, and then use the fishing net line to repair. 2. According to the shape and size of the hole to determine the repair method. 3. Apply the appropriate repair method to do the repair work, not only the quality is good, but also fast.

There are two kinds of mending methods: 1. The braiding method is suitable for mending small holes and cracks in the net. It is most applied in general. Skillful mastery of braiding and mending method, in order to avoid the occurrence of small holes hanging torn mesh. The braiding method is divided into single line braiding method and heavy line braiding method. The single-line mending method is for the netting of drift gillnet, and the process requirements are relatively strict. Costly labor and material. Heavy wire mending method is more costly, but the mending speed, process requirements are low. 2. embedded mending method for fishing nets on the large holes. Embedded patching method is also called digging patching method, for the repair of large holes, the efficiency is very high, can greatly save time and labor. Above, a brief introduction to the fishing net repair technology, skillful mastery of this technology, fishermen and fishing net manufacturers are of great significance.

Contact info

Tel: +86-543-6422001 /+86-13954353318

E-mail: liuyixiong@fishnethome.cn

Address:Room 1711, North Building, Block A, Fengze Yujing, Bincheng District, Binzhou City, Shandong Province

                 Dongshou, Xingbo Road, Xiaobotou, Wudi County, Binzhou City, Shandong Province

Please fill in the form below and we will contact you as soon as possible.

%{tishi_zhanwei}%

All rights reserved © 2024 Binzhou Net Home Information Technology Co., ltd. | SEO

Business License